View MCH6602_313973.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6445
N-Channel Silicon MOSFET
MCH6602
Ultrahigh-Speed Switching Applications
Features
* Low ON resistance. * Ultrahigh-speed swithcing. * 2.5V drive. * Composite type with 2 MOSFETs contained in one package, facilitating high-density mounting.
Package Dimensions
unit:mm 2173
[MCH6602]
0.25 0.3 6 5 4 1.6 2.1 0.15
1
2.0
0.25
23 0.65
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Conditions
1 : Source1 2 : Gate1 3 : Drain2 4 : Source2 5 : Gate2 6 : Drain1 SANYO : MCPH6
0.15
0.85
Ratings 30 10 0.35 1.4 0.8 150 -55 to +150
Unit V V A A W C C
Mounted on a ceramic board (900mm2x0.8mm) 1unit
Electrical Characteristics at Ta = 25C
Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Symbol V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 ID=1mA, VGS=0 VDS=30V, VGS=0 VGS=8V, VDS=0 VDS=10V, ID=100A VDS=10V, ID=80mA ID=80mA, VGS=4V ID=40mA, VGS=2.5V ID=10mA, VGS=1.5V 0.4 0.15 0.22 2.9 3.7 6.4 3.7 5.2 12.8 Conditions Ratings min 30 10 10 1.3 typ max Unit V A A V S
Marking : FB
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
30300TS (KOTO) TA-2509 No.6445-1/4
MCH6602
Continued from preceding page.
Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=10V, VGS=10V, ID=150mA VDS=10V, VGS=10V, ID=150mA VDS=10V, VGS=10V, ID=150mA IS=150mA, VGS=0 Conditions Ratings min typ 7.0 5.9 2.3 19 65 155 120 1.58 0.26 0.31 0.87 1.2 max Unit pF pF pF ns ns ns ns nC nC nC V
Electrical Connection
Switching Time Test Circuit
VDD=15V
D1
G2
S2
4V 0V VIN VIN ID=80mA RL=187.5
D
VOUT
PW=10s D.C.1%
G
S1 G1 (Top view) D2
P.G 50
MCH6602
S
0.16 0.14 0.12 0.10 0.08
ID -- VDS
5V 2.
0.30
ID -- VGS
VDS=10V
V
3.5V 4.0V
3.0
2.0
V
0.25
Ta= --25 C
Drain Current, ID - A
Drain Current, ID - A
V
6.0
0.15
VGS=1.5V
0.06 0.04 0.02 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.10
0.05
0 0 0.5 1.0 1.5 2.0 2.5 3.0 IT00030
Drain-to-Source Voltage, VDS - V
10 9
IT00029 10
Gate-to-Source Voltage, VGS - V
RDS(on) -- VGS
Ta=25C
RDS(on) -- ID
VGS=4V
7
Static Drain-to-Source On-State Resistance, RDS (on) -
Static Drain-to-Source On-State Resistance, RDS (on) -
8 7 6
5
Ta=75C
3
80mA
5
25C --25C
ID=40mA
4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10
2
Gate-to-Source Voltage, VGS - V
1.0 0.01
2
3
5
7
75
2
C
0.20
25
3
C
5 IT00032
0.1
IT00031
Drain Current, ID - A
No.6445-2/4
MCH6602
10
RDS(on) -- ID
VGS=2.5V
100 7 5
RDS(on) -- ID
VGS=1.5V
7
Static Drain-to-Source On-State Resistance, RDS (on) -
Static Drain-to-Source On-State Resistance, RDS (on) -
5
Ta=75C 25C
3 2
3
--25C
10 7 5 3 2
Ta=75C --25C 25C
2
1.0 0.01
2
3
5
7
Drain Current, ID - A
0.1
2
3
5 IT00033
1.0 0.001
2
3
5
7
Drain Current, ID - A
0.01
2
3
5 IT00034
7
RDS(on) -- Ta
Forward Transfer Admittance, | yfs | - S
1.0 7 5
yfs -- ID
VDS=10V 25C
6
Static Drain-to-Source On-State Resistance, RDS (on) -
5
4
3
V 40m =4.0 I D= , VGS A 80m I D=
G A, V
2. S=
5V
3 2
2 Ta=--
5C
75C
0.1 7 5 3 2
2
1 0 --60
--40
--20
0
20
40
60
80
100
120
140
160
Ambient Temperature, Ta - C
1.0 7 5
0.01 0.01
2
3
5
7
IT00035 1000
Drain Current, ID - A
0.1
2
3
5 IT00036
IF -- VSD
VGS=0
SW Time -- ID
VDD=15V VGS=4V
7
3 2
Switching Time, SW Time - ns
5 3 2
Forward Current, IF - A
75 C 25 C --2 5C
td (off) tf
tr
Ta =
0.1 7 5 3 2
100 7 5 3 2
td(on)
0.01 0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2 IT00037
10 0.01
2
3
5
7
Diode Forward Voltage, VSD - V
100 7 5
Drain Current, ID - A
0.1
2 IT00038
Ciss, Coss, Crss -- VDS
f=1MHz
10 9
VGS -- Qg
VDS=10V ID=150mA
Gate-to-Source Voltage, VGS - V
12 14 16 18 20
8 7 6 5 4 3 2 1
Ciss, Coss, Crss - pF
3 2
10 7 5 3 2
Ciss Coss
Crss
1.0 0 2 4 6 8 10
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Drain-to-Source Voltage, VDS - V
IT00039
Total Gate Charge, Qg - nC
IT00040
No.6445-3/4
MCH6602
ASO
3 1.0
PD -- Ta
1.0
Allowable Power Dissipation, PD - W
2
IDP=1.4A
100s
Drain Current, ID - A
7 5 3 2 0.1 7 5 3 2 0.01
1m
0.8
s
M
ou
ID=0.35A
DC
Operation in this area is limited by RDS(on). Ta=25C Single pulse 1unit
2
10m
nt
ed
s
on
0.6
100
ope
ac
er
ms
ion
am
ic
bo
rat
0.4
ar
d(
90
0m
0.2
m2 x0
.8m
m
)1
Mounted on a ceramic board (900mm2x0.8mm)
1.0 3 5 7
un
it
160
0 3 5 IT01117 0 20 40 60 80 100 120 140
Drain-to-Source Voltage, VDS - V
10
2
Ambient Temperature, Ta - C
IT01118
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of March, 2000. Specifications and information herein are subject to change without notice.
PS No.6445-4/4

▲Up To Search▲

Price & Availability of MCH6602

	To Download MCH6602 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .